Corsair LL140 RGB 140mm Fan Twin Pack with Lighting Node PRO
Two Corsair LL140 RGB fans plus the hub and Lighting Node PRO needed to run them, in one starter kit.
The LL series is Corsair’s dual-loop lighting fan. Each LL140 carries sixteen individually addressable RGB LEDs split between an outer ring on the frame and an inner ring around the hub, and because the two loops are controlled separately the fan can show effects that run inwards, outwards or in opposite directions. This twin pack is the entry point to the range: it includes the RGB Lighting Hub that the fans plug into and the Lighting Node PRO that drives the hub over an internal USB header, so nothing else is needed to get the lighting working. Single LL140 fans sold separately expand this kit rather than replace it.
Cooling performance
The 140mm blade is designed for low noise, running from 600 to 1300 RPM under PWM control with 51.5 CFM of airflow and 1.52 mmH2O of static pressure at full speed, and a rated 25 dBA. That makes the LL140 well suited to front intake and top exhaust positions where it can run slowly for most of the day.
iCUE control
With the Lighting Node PRO connected, Corsair’s iCUE software controls colours and effects for both fans and synchronises them with other iCUE devices. Fan speed is controlled by the motherboard through the 4-pin PWM connectors. Punch can fit this kit in a new build and set up an iCUE profile before dispatch.
Ideal for
- Starting a Corsair LL-series lighting setup from scratch
- Two 140mm front intakes with matched dual-loop lighting
- Builds already using iCUE hardware
Specifications
- Model: CO-9050074-WW
- Fan size: 140 x 25mm
- Speed: 600 to 1300 RPM, PWM
- Airflow: 51.5 CFM
- Static pressure: 1.52 mmH2O
- Noise: 25 dBA
- Bearing: Hydraulic
- Operating voltage: 7 to 13.2V; power draw 0.3A
- LEDs: 16 per fan, two independent light loops
- Package: 2 LL140 RGB fans, RGB Lighting Hub, Lighting Node PRO, mounting strips
- Warranty: 2 years
What others are saying
There are no contributions yet.