Contour LE01 Tempered Glass Gaming Case, No Fans
A black mid-tower gaming chassis with tempered glass front and side panels, supplied without fans so you choose the cooling.
The Contour LE01 is an ATX mid tower with toughened glass across the front and down the side, and air intakes along the front edges, top and bottom to feed whatever fans you fit. This version is the same 0.6mm steel chassis as the LE01 ARGB listing but comes bare, so the cooling can be matched to the processor and graphics card rather than paying for a bundled fan set you might replace. It takes ATX, mATX and Mini-ITX motherboards and suits a first gaming PC or a budget rebuild that still wants a glass window.
Cooling and clearances
There are four 120mm fan mounts, three at the front and one at the rear, and room for a 240mm radiator at the front or a 120mm radiator at the rear for an all-in-one liquid cooler. Graphics cards up to 385mm long and CPU coolers up to 168mm tall fit, which covers most current cards and tower air coolers. Punch can fit the LE01 in a new build with a fan set installed and set up for quiet running.
Storage and layout
Storage includes two 2.5in SSD bays and two caddies that take 3.5in or 2.5in drives, with no 5.25in bay. A full-length PSU shroud hides a bottom-mounted ATX (PS2) power supply and its cabling, seven expansion slots cover multi-slot graphics cards, and removable dust filters under the PSU and drive area keep the inside clean. The front panel carries two USB 3.0 ports, one USB 2.0 port and separate headphone and microphone jacks.
Ideal for
- Entry-level gaming PCs with a glass window
- Builders fitting their own fans or lighting
- Budget ATX builds with a 240mm liquid cooler
Specifications
- Type: Mid tower
- Motherboard support: ATX, mATX, Mini-ITX
- Dimensions (D x W x H): 413 x 210 x 455mm
- Colour: Black
- Material: 0.6mm steel body, tempered glass front and side panels
- Fans included: None
- Fan mounts: 4 x 120mm (3 front, 1 rear)
- Radiator support: Front up to 240mm; rear 120mm
- Max graphics card length: 385mm
- Max CPU cooler height: 168mm
- Drive bays: 2 x 2.5in SSD bays, 2 caddies for 3.5in or 2.5in drives, no 5.25in bay
- Expansion slots: 7
- PSU support: ATX (PS2), bottom mounted under a full-length shroud
- Front I/O: 2 x USB 3.0, 1 x USB 2.0, headphone and microphone jacks
- Dust filters: Removable (PSU and HDD area)
- Side panel: Tempered glass
What others are saying
There are no contributions yet.