Contour Helios ATX Glass Cube Gaming Case

SKU:

1000538

£79.99 (inc VAT)

Trustpilot

Out of stock

Payment Options

The Contour Helios is a mid size ATX cube case with a quality and modern design. It features clear glass panels to the front, top and both sides. The back is made with high quality steel. The front and top are each fitted with large 200mm red LED cooling fans. The glass panels are fixed in place with rubber mountings and secured with thumbscrews. At the left side of the chassis there is space for 2 x 2.5″ SSDs and 2 x 3.5″ hard drives.

 

The large 200mm LED fans give the chassis an attractive appearance as they can be viewed through the glass front and also from the inside of the chassis through the glass side panels. Unusually, the mainboard mounts to the right hand side of the chassis and is mounted with the expansion slots toward the top which is the opposite way round to most chassis.

 

The area in front of the motherboard tray can be used for liquid cooler radiators up to 240mm in length. A gap of only 55mm from the bottom edge of a full ATX motherboard PCB to the top of the radiator mounting space will allow for the thickness of a slim radiator and cooling fan. We recommend you check the total thickness of your radiator before ordering as thicker units can foul the edge of large motherboards.

 

The motherboard mounting tray only big enough for standard ATX motherboards of 244mm depth we don’t recommend this chassis for use with extended ATX motherboards and very long graphics cards could prove an issue if they are longer than 244mm. The PSU mount is designed to accept ATX PS2 power supplies right up to 220mm long.

 

Specification:

 

Materials Outlook: Plastic, Steel & Glass
Body: Steel
Side panels: Tempered Glass
Front panel: Tempered Glass
Top Panel: Tempered Glass
Dimensions (LxWxH) 380 x 300 x 475mm
Motherboard Support Mini-ITX, Micro-ATX, ATX
Expansion Slots 7
Drive Bays 5.25″ 0
3.5″ 2
2.5″ SSD 2
I/O Port USB 3.0 x 1
USB 2.0 x 2
Audio In & Out (supports HD Audio)
Pre-installed Fan(s) Front 1 x 200mm x 25mm Red LED Fan 800 Rpm
Top 1 x 200mm x 25mm Red LED Fan 800 Rpm
Fan Support Top No further fans
Rear None
Liquid Cooling Support Top None
Front 120mm, 240mm (maximum thickness clearance 55mm)
Rear None
Clearance CPU Cooler 155mm
GPU 280mm without liquid cooling or 244mm with
Power Supply Support Bottom mount, ATX PS2 up to 220mm long

Trustpilot Product Reviews

Ask a question